document number: 51007 for technica l questions, contact: sfer@vishay.com www.vishay.com revision: 27-jun-07 15 ts5y vishay sfernice surface mount miniature trimmers single-turn cermet fully sealed the ts5 trimming potentiometer has been designed for surface mount applications and offers volumetric efficiency (5 x 5 x 2.7 mm) with high performance and stability. the ts5 design is suitable for both manual or automatic operation, and can withstand wave and reflow soldering techniques. features ? 0.25 w at 70 c ? cecc 41100 ? gam t1 ? professional grade ? wide ohmic range (10 to 1 m ) ? full sealing ? low contact resistance variation (1 % or 3 ) ? small size for optimum packing density ? suitable for both manual or automatic operation dimensions in millimeters 5 2.7 6.4 0.20 ? 2.5 max 5 2.7 5.5 0.20 ? 2.5 max a6 103 1 x 0.20 5 b a c 0.9 x 0.20 2.30 1 0.20 5 b a c 0.9 0.20 2.30 TS5YL ts5yj 1.3 2 b 5.5 1.3 1.3 2.3 a c 2 1.3 2 2 2.3 b a c 4 j version rohs compliant circuit diagram ts5yj recommended soldering areas 3.2 0.10 1.1 0.65 0.10 ? 2.5 adhesive pad a c b cw (2) (1) (3) cruciform screwdriver slot ? 2.5, width 0.5 deep: 0.55 max deep (center): 0.7 adhesive pad (detail) tolerance unless otherwise specified 0.25 mm TS5YL
www.vishay.com for technical ques tions, contact: sf er@vishay.com document number: 51007 16 revision: 27-jun-07 ts5y vishay sfernice surface mount miniature trimmers single-turn cermet fully sealed mechanical specifications mechanical travel 270 10 operating torque (max. ncm) 1.5 end stop torque (max. ncm) 3.5 unit weight (max. g) 0.15 environmental specifications temperature range - 55 c to + 125 c climatic category 55/125/56 sealing fully sealed container solder immersion ip67 power rating chart electrical specifications resistive element cermet electrical travel 220 15 resistance range 10 to 1 m standard series 1 - 2 - 5 tolerance standard 10 % power rating linear 0.25 w at 70 c logarithmic not applicable temperature coefficient see standard resistance element data limiting element voltage (linear law) 200 v contact resistance variation 1 % or 3 end resistance (typical) 0.1 % or 3 dielectric strength (rms) 1000 v insulation resistance 1 g specification in accordance with cecc 41100 0 20 40 60 85 100 120 140 155 70 0.05 0 0.1 0.15 0.2 0.25 ambient temperature in c rated power in w performance tests conditions typical values and drifts rt rt (%) r 1-2 r 1-2 (%) load life 1000 hours at rated power 90'/30' - ambient temperature + 70 c 2 % 3 % contact resistance variation: r < 1 % rn climatic sequence phase a dry heat 125 c phase b damp heat phase c cold - 55 c phase d damp heat 5 cycles 2 % 3 % long term damp heat temperature 40 c - rh 93 % 56 days 2 % 3 % dielectric strength: 1000 v rms insulation resistance: > 10 4 m thermal shock 55 c to + 125 c - 5 cycles 1 % v 1-2 v 1-3 2 % rotational life (electrical and mechanical) 100 cycles - rated power (3 % + 5 ) shock 50 g - 11 ms 3 successive shocks in 3 directions 1 % v 1-2 v 1-3 1 % vibration 10 - 55 hz 0.75 mm or 10 g - 6 hours 1 % v 1-2 v 1-3 1 %
document number: 51007 for technica l questions, contact: sfer@vishay.com www.vishay.com revision: 27-jun-07 17 ts5y surface mount mi niature trimmers single-turn cermet fully sealed vishay sfernice marking (red mark) vishay trademark, ohmic value, manufacturing date, red mark. the ohmic value is indicated by a 3 figure code, the first two are significant figures, the third one is the multiplier. example: 100 = 10 101 = 100 102 = 1000 503 = 50 000 soldering recommendations see application notes standard resistance element data standard resistance values linear law typical tcr - 55 c + 125 c max. power at 70 c max. working voltage max. cur. through element w v ma ppm/c 10 20 50100 200 500 1k 2k 5k 10k 20k 50k 100k 200k 500k 1m 0.25 0.25 0.20 0.08 0.04 1.58 2.24 3.545.00 7.07 11.2 15.8 22.4 35.4 50.0 70.7 112 158 200 200 200 158 112 7150 35 22 16 11 7 5 3.5 2.2 1.6 1.0 0.4 0.2 100 packaging on tape and reel of 500 pieces, code tr and 2000 pieces, code tr1 cover tape panel strength specifications eia 481 a and cei 60286-3. 3 solts - width 2 to 120 - ? ext. 23 ? 12.7 ? 178 2 0.3 3.2 2 ? 70 13 8 5.2 7.6 12 5.5 1.75 4 2 ? 1.5 ordering information ts5 series yl style 500 k ohmic value 10 % tolerance tr500 pac k ag i n g e3 lead finish tr: tape and reel 500 pcs tr1: tape and reel 2000 pcs e3: pure sn sap part numbering guidelines ts5 yl 504 kr10 model style ohmic v alue tol packagi n g code special (if applicable) see the end of this data b ook for con v ersion ta b les
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
